The simple but intuitive outputs make the overall configuration of the console extremely quick and easy to use.

Busses: 15
Subgroups: 4
Aux Pre-Fader (Monitor): 2
Aux Post-Fader (Effects): 2
Aux switchable Pre/Post-Fader: 2
Master L/R: 2
Mono-PFL: 1
Stereo-AFL: 2

Outputs
Subgroups (with Inserts): 4 impedanced balanced 1/4 inch jacks
Aux Pre-Fader (Monitor): 2 XLR (balanced)
Aux Post-Fader (Effects): 2 impedanced balanced 1/4 inch jacks
Aux switchable Pre/Post-Fader: 2 XLR (balanced)
Master (with Inserts): 2 XLR (balanced)
Master B Out: 2 XLR (balanced)
(switchable Mono/Stereo, pre-post Fader):
Tape Send (Recording): 1 Stereo (Phono)
Direct Outputs (1/4 inch Jack): 24
Stereo-Headphones: 2 Stereo-1/4 inch jack
Stereo-Speakers: 2 impedanced balanced 1/4 inch jacks

Additional Features
Connector for desk lamps: 2 x 12V/5W (4-Pin XLR)

Technical Data
Input Impedance
Mic: 2kΩ Balanced
Line: 20kΩ Balanced

Input Gain
Mic: Continuously variable 0dB to +60dB
Line (Mono Channell): Continuously variable -20dB to +40dB
Line (Stereo Channel): Continuously variable -10dB to +20dB
Line Level Inputs: 0 dB

Maximum Input Level
Microphone and Line: +22dBu
Line Mono Channel: +42dBu
Line Stereo Channel: +28dBu

CMR at 1kHz
Mic (Gain +40dB): > 85dB
Line: > 45dB

CMR at 100Hz
Mic (Gain +40dB): 75dB typical

Frequency Response (20Hz-20kHz)
Mic to Mix (Gain +60dB): + 0dB to -1dB

Noise (20Hz-20kHz)
Mic EIN ref. 150Ω gain +60dB: -129dBu
Mic EIN ref. 150Ω gain 0dB: -107dBu

System Noise (20Hz-20kHz)
Summing Noise (16channels routed, faders down): -90dBu
Line to Mix Noise (16 channels routed at 0dB): -84dBu

Distortion at 1kHz
Mic to Insert (+30dB Gain. +20dBu Output): Typ 0.0007%
Mic to Master (+30dB Gain, +20dBu Output): < 0.009%

Crosstalk at 1kHz
Channel to Channel: < -80dB
Mix to Mix: < -80dB
Channel to Mix: < -80dB
Fader Attenuation: > 100dB
Switch Rejection: > 100dB

Output Impedance
Line Outputs: 75Ω balanced
Headphones: to drive 32Ω

Maximum Output Level
Master Outputs: +25dBu
Line Outputs: +22dBu
Headphones: +22dBu / 600Ω

Nominal Signal Level
Microphone: – 60dBu to 0dBu
Line: 0dBu

Equalizer Mono Channel
Hi Pass Filter: 2nd order Butterworth, 80Hz
Treble: +/-15dB at 12kHz (Shelv)
Hi Mid: Continuously variable 400Hz to 8kHz
Lo Mid: Continuously variable 100Hz to 2kHz (1 Oct) +/-15dB
Bass: + /-15dB at 80Hz (Shelv)

Equalizer Stereo Channel
Treble: +/-15dB at 12kHz (Shelv)
Hi Mid: 3kHz (1,4 Oct) +/-15dB
Lo Mid: 300Hz (1,4 Oct) +/-15dB
Bass: +/-15dB at 80Hz (Shelv)